key features and benefits applications technical information specifications lc small form factor (sff) field polish connectors with rear pivot latch are tia/eia-604 focis-10 compatible. lc simplex and duplex connectors are field terminable. the fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of .1db per mated pair for multimode and singlemode fiber. lc duplex fiber optic connectors for 1.6mm ? 2.0mm jacketed cable multimode: flcdmei singlemode: flcdsbu lc duplex fiber optic connectors for 900m buffered fiber multimode: FLCDM900EI singlemode: flcds900bu lc sr./jr. sff fiber optic adapters duplex mm: fadjlcei-l duplex 10g ig ? : fadjlcaq-l duplex 10g ig ? (zirc.): fadjlczaq-l simplex 10g ig ? (zirc.): fasjlczaq-l duplex sm (zirc.): fadjlczbu-l simplex sm (zirc.): fasjlczbu-l l = bag of 50 adapters; 100 per carton. for sr./sr., replace j in part number with s. m ini -c om ? sr./jr. lc adapter modules duplex mm: cmdjlc** duplex 10g ig ? : cmdjaqlcbl duplex 10g ig ? (zirc.): cmdjaqlczbl duplex sm (zirc.): cmdjlcz** for sr./sr., replace j in part number with s. o pticom ? lc fiber adapter panels 6 duplex 10g ig ? : fap6waqdlcz 6 duplex mm: fap6weidlc 6 duplex sm (zirc.): fap6wbudlcz 12 duplex mm: fap12weidlc 12 simplex sm (zirc.): fap12wbulcz o pticom ? q uick n et ? pre-terminated mtp* cassettes 6 lc to mtp* (12f): fc^-12-10 12 lc to 2 mtp* (24f): fc^-24-10 o pti -c ore ? fiber optic patch cords duplex lc to lc: f^e10-10m? simplex lc to lc: f^f10-10m? simplex lc to pigtail: f^b10-nm? lc termination tooling 110v termination kit: flpkit 230v termination kit: flpkit-w refurbishment kit: flpkit-rfb hd connector removal tool for lc and sc: hdcrt **substitute for module color: ei = electric ivory bu = blue ig = international gray wh = white tg = technical gray bl = black aw = arctic white i w = off white ew = european white ^substitute for fiber type: x (om3 ? 10g ig ? 50/125m), 5 (om2 ? 50/125m), 6 (om1 ? 62.5/125m) or 9 (os1 ? 9/125m). ?substitute for length in meters: 1, 2, 3, 5 or 10 for patch cords, and 1, 2 or 3 for pigtails; singlemode patch cords are also available in 12, 15, 25 or 30 meter lengths. contact customer service for other available lengths. lc simplex fiber optic connectors for 900m buffered fiber and 1.6mm ? 2.0mm jacketed cable multimode: flcsmei singlemode: flcssbu standards requirements: tia/eia-604 focis-10 compatible; exceeds tia/eia-568-b.3 requirements fiber compatibility: 62.5/125m om1, 50/125m om2, 10g ig ? 50/125m laser optimized om3 and 9/125m os1 fiber cable type: 900m tight-buffered cable recommended fiber cable size: 1.6mm ? 2.0mm jacketed cable ferrule type: zirconia ceramic ferrule insertion loss: .1db average (multimode and singlemode) return loss: >20db (multimode), >40db (singlemode) panduit lc fiber optic connectors provide a rugged solution for high-density telecommunication rooms, lans, public networks and fiber-to-the-desk applications. lc simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work area applications for high-speed data transmissions. the high-density design and 1.25mm ferrules double the port density (compared to sc connectors) to reduce space requirements on racks, enclosures, panels and faceplates. rear pivot latch design, longer beam reduces deflection during mating and unmating robust construction to reduce latch fatigue, leading to longer cycle life anti-snag latch low profile latch resists cable snagging wide ?positive grip? multi-grooved, full body width thumb latch improves grip for thumb latch better control during matings/unmatings; promotes fast, easy macs (moves, adds, changes) in high-density applications audible ?click? upon provides user with a definitive signal of successful successful mating connector mating field installable duplex allows fast, easy field polarity changes without tools; quick clip with integrated identification of polarity polarity markers one connector body a single connector design is used for both simplex design for both simplex and duplex patch cords and inside the wall applications to and duplex applications simplify installation protective cap locks onto protective cap automatically locks onto connector latch, connector latch with completely covering connector end; prevents ferrule end face audible ?click? damage by providing protection from contamination and impact anaerobic adhesive simplifies and reduces installation time by 50% compared to field installation heat cured epoxy terminations; curing oven/time not required rugged body construction stable performance under side loads for improved reliability independent free-floating ensures physical fiber contact for consistent low return loss, ferrules unlike unitary multi-fiber ferrule connectors 1.25mm ceramic ferrules provide the highest durability for repeated matings www.panduit.com specification sheet lc fiber optic connectors ? *mtp is a registered trademark of us conec ltd.
2.20 [56.0] 1.60 [40.6] lc simplex connectors for 900m fiber and 1.6mm ? 2.0mm jacketed cable for 900m fiber or 1.6mm ? 2.0mm jacketed cable .25 [6.35] flcsmei, flcssbu FLCDM900EI, flcds900bu lc duplex connectors 1.60 [40.6] .25 [6.35] lc fiber optic connectors ?2005 panduit corp. all rights reserved. printed in the u.s.a. ww-fbsp13 replaces sa-fbsp07 10/2005 dimensions are in inches [dimensions in brackets are in millimeters]. worldwide subsidiaries and sales offices for a copy of panduit product warranties, log on to www.panduit.com/warranty panduit canada markham, ontario cs-cdn@panduit.com phone: 800.777.3300 panduit europe ltd. london, uk cs-emea@panduit.com phone: 44.20.8601.7200 panduit japan tokyo, japan cs-japan@panduit.com phone: 81.3.3767.7011 panduit singapore pte. ltd. republic of singapore cs-ap@panduit.com phone: 65.6379.6700 panduit australia pty. ltd. victoria, australia cs-aus@panduit.com phone: 61.3.9794.9020 panduit latin america jalisco, mexico cs-la@panduit.com phone: 52.333.666.2501 contact customer service by email: cs@panduit.com or by phone: 800-777-3300 and reference fbsp13 visit us at www.panduit.com for more information performance information test parameter description result qualification test suite (tia/eia-568-b.3 requirements) complete testing protocol per tia/eia-568-b.3 using tia/eia fotps that include mechanical, environmental and optical test sequences compliant; exceeds tia/eia-568-b.3 requirements connector intermatability dimensional and material compliance to tia/eia standards all connectors are focis compatible with tia/eia-604-10 selection information part number flcsmei simplex 900m buffered fiber and 1.6mm ? 2.0mm jacketed cable flcdmei duplex 1.6mm ? 2.0mm jacketed cable FLCDM900EI duplex 900m buffered fiber flcssbu simplex 900m buffered fiber and 1.6mm ? 2.0mm jacketed cable flcdsbu duplex 1.6mm ? 2.0mm jacketed cable flcds900bu duplex 900m buffered fiber *all connector insertion loss values calculated from tests taken with precision launch jumper assemblies per tia/eia-fotp-171. connector type cable type fiber ferrule housing color boot color return loss average insertion loss* multimode zirconia ceramic electric ivory electric ivory >20 .1db singlemode zirconia ceramic blue blue >40 .1db flcdmei, flcdsbu 2.20 [56.0]
|
